Versione Italiana English Version Deutsch Español Français
PRODUCTS AND SOLUTIONS


 
Home
 
 
BEHR THERMOSTATS
 
 
Intelligent control systems from Behr Thermot-tronik are used in millions of applications worldwide to provide needs-based precision temperature control. 
Our customers benefit from a fast pace of innovation, high process reliability, and cost-saving solutions, not to mention products that facilitate greater operational efficiency as well as reduced fuel consumption and emissions. 
 
BEHR THERMOSTAT INSERTS
 
 
Simple, effective, and tried and tested millions of times over: thermostat inserts from Behr Thermot-tronik provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery.
 
BEHR INTEGRAL THERMOSTATS
 
 
Advanced development of thermostat inserts: all components, including thermostat insert, cover, and seal, are optimally integrated in the integral thermostat. The integral thermostat can be directly flange-mounted on the engine block.
 
BEHR HOUSING THERMOSTATS
 
 
Complete thermostats for hose connection: unlike integral thermostats, housing thermostats already possess a housing with an optimally designed mixing chamber.
 
BEHR MAP-CONTROLLED THERMOSTATS
 
 
The most intelligent way to control engine temperature: in the case of map-controlled thermostats, the cooling circuit is additionally regulated via the engine electronics. An electric thermal resistor is integrated into the wax material of the element, and is controlled via the engine management characteristics map. This enables two temperature levels to be maintained with one thermostat. The result: greater engine output and lower fuel consumption and emissions.
 
BEHR BYPASS THERMOSTATS
 
 
Our compact thermostats for special applications control individual coolant flows independently of temperature, e.g. for cooling ancillary units.
 
BEHR TRANSMISSION OIL THERMOSTATS
 
 
In automatic transmissions in motor vehicles, transmission oil thermostats are used to control the oil temperature. With transmission oil thermostats from Behr Thermot-tronik, the duration of the engine warm-up phase is significantly reduced, with the transmission subsequently maintained at an ideal operating temperature.

The result: reduced wear and tear at the transmission and degradation of the oil, smoother gear-shifting in automatic transmissions, and fuel savings of around 1 % in typical driving cycles. The reduction of major fluctuations in oil temperature means that one filling of the transmission is sufficient for its entire service life. Behr Thermot-tronik provides systems for temperature regulation that are suitable for both coolant-oil heat exchangers and air-oil heat exchangers alike.
 
BEHR COOLANT THERMOSTATS
 
 
Our thermostats keep the coolant at a constant temperature and within a set temperature range in ships, locomotives, power plants, track vehicles, and wind turbines. They are available in the oscillator controller version for flow rates of 10 to 160 m3/h, or as heavy-duty controllers for quantities of 10 to 500 m3/h, in each case in nominal widths of DN 45 to 125.
 
BEHR OIL TEMPERATURE THERMOSTATS AND INSERTS
 
 
Behr Thermot-tronik oil temperature thermostats regulate oil circuits with flow rates of 3 to 15 m3/h – functioning precisely, independent of position, fully maintenance-free, and irrespective of the static or dynamic pressure.
Thanks to their long service life and wide range of applications, they are ideally suited for installation in compressors and construction machinery, or in wind turbines and hydraulic systems. We manufacture oil temperature thermostats with threaded or flange connectors for use as distribution or mixer controllers.

Oil temperature thermostat inserts
These are just as reliable and durable as the oil temperature thermostats, and, thanks to their light weight, can be installed directly into a distribution block. Oil temperature thermostat inserts can also be used as distribution or mixer controllers.
 
BEHR HEAVY-DUTY THERMOSTAT INSERTS
 
 
These workhorses control coolant circuits in heavy-duty engines such as trucks, ships, and locomotives, with coolant flow rates exceeding approximately 20 m3/h. The annular slide principle employed ensures axial relief for the wax element, and thus precise regulation in conjunction with high functional reliability and durability, even under high hydraulic loads.

Heavy-duty thermostat insertsMap-controlled heavy-duty thermostat inserts
An electric heating resistor controlled by the engine management map is integrated into the wax element. This allows two temperature levels with just one thermostat. The result is increased engine power and lower fuel consumption and emissions.
 
 
SKF SKF AUTOMOTIVE BOSCH REXROTH
REMSA MULLER FILTERS DAYCO
DONALDSON OPTIBELT PERKINS
VALEO DENSO AVA
MAGNETI MARELLI NRF AUTOGAMMA
CORTECO STC OPEN PARTS
RACOR OCAP EUROLITES
FILTRON AHE OSRAM
FAG STM MONROE
DEUTZ STABILUS BEHR
REPSOL LUK INA
  
 
  
 


Our brands, quality certified
Section continuously updated.
If you do not find what you need please contact us...
donaldson filters part number
filters oem part number
cooling fan oem part number
autogamma fan part number

Learn more...

 
Find Special Offers...
Section continuously updated.
oem part number steering and suspension parts
racor filters part number   racor filters codes
Bosch Rexroth linear motion
If you do not find what you need please contact us...

Learn more...

 
Contact us - Call us
Michele Caroli Srl
S.p. Bari-Modugno Km. 0,800 - 70026 Modugno (Ba)
Fax +39 080.5899263 e-mail:info@michelecaroli.com
P.Iva 02581050727

Learn more...

 
© 2010 Michele Caroli Srl. Tutti i diritti riservati. Created by www.omnilink.it