Versione Italiana English Version Deutsch Espa˝ol Franšais
PRODUCTS AND SOLUTIONS


 
Home
 
 
FAG BEARINGS
 
 
FAG super precision bearings for main spindles stand for very high precision and absolute operational security. Innovative FAG spindle bearing solutions are continually raising standards in relation to speeds, accuracy and rating life. For the main spindle system and the overall machine tool system to be successful, however, bearing components alone are no longer sufficient as a guarantee. 

Significant increases in performance and the creation of unique selling propositions for the customer are now achieved when the bearing manufacturer offers advice and carries out development work on the basis of wide-ranging system knowledge as well as being able to provide support through a range of service functions. 
 
FAG SPINDLE BEARINGS
 
 
FAG spindle bearings are super precision single row angular contact ball bearings with solid outer and inner rings, ball and cage assemblies and solid window cages, Figure 1. The dimensions are standardised. Due to their very narrow tolerances, the spindle bearings are particularly suitable for applications involving the highest requirements for guidance accuracy, such as bearing arrangements for main spindles in machine tools.

The bearings are available in all the designs that are relevant to bearing arrangements for main spindles in machine tools. This extensive range of variants is presented in the dimension tables. In addition to the products listed therein, further designs are available by agreement. This extensive product range gives the designer all possible scope for developing technically innovative, operationally secure and economical bearing arrangements. 

This results in significant performance improvements and cost savings in machine tools. In new designs, this can allow the machine manufacturer to achieve a unique position in the market. In existing designs too, refitting with FAG spindle bearings can still give further increases in the performance and profitability of machines.
 
FAG CYLINDRICAL ROLLER BEARINGS
 
 
FAG super precision cylindrical roller bearings comprise solid outer rings, solid inner rings with a tapered bore (taper 1:12) and cylindrical roller and cage assemblies with cages made from brass or PEEK (polyether ether ketone). The outer ring is removable and can thus be mounted separately from the normal bearing package. The inner ring is only removable in the case of series NNU49. 

The single and double row bearings are used when very high precision under very high radial load is required. Typical areas of application include machine tools and printing machinery. In these cases, they facilitate bearing arrangements with high accuracy, high radial rigidity and very high load carrying capacity. In machine tool building, they provide radial support for the main spindle.
 
FAG AXIAL BALL BEARINGS
 
 
Double direction axial angular contact ball bearings are highly rigid, axially preloaded super precision bearings with restricted tolerances to class SP for the bearing arrangements of precision spindles in machine tools. These bearings without self-retention comprise solid shaft locating washers, a spacer ring, a housing locating washer and ball and cage assemblies with solid cages. 

The bearing parts are matched to each other and can be fitted separately, but must not be interchanged with parts from bearings of the same size. Due to the contact angle of 60░, they can support high axial forces from one side. In bearing arrangements of main spindles, the axial angular contact ball bearing is combined with a double row cylindrical roller bearing with a tapered bore, which supports the radial forces.
 
 
SKF SKF AUTOMOTIVE BOSCH REXROTH
REMSA MULLER FILTERS DAYCO
DONALDSON OPTIBELT PERKINS
VALEO DENSO AVA
MAGNETI MARELLI NRF AUTOGAMMA
CORTECO STC OPEN PARTS
RACOR OCAP EUROLITES
FILTRON AHE OSRAM
FAG STM MONROE
DEUTZ STABILUS BEHR
REPSOL LUK INA
  
 
  
 


Our brands, quality certified
Section continuously updated.
If you do not find what you need please contact us...
donaldson filters part number
filters oem part number
cooling fan oem part number
autogamma fan part number

Learn more...

 
Find Special Offers...
Section continuously updated.
oem part number steering and suspension parts
racor filters part number   racor filters codes
Bosch Rexroth linear motion
If you do not find what you need please contact us...

Learn more...

 
Contact us - Call us
Michele Caroli Srl
S.p. Bari-Modugno Km. 0,800 - 70026 Modugno (Ba)
Fax +39 080.5899263 e-mail:info@michelecaroli.com
P.Iva 02581050727

Learn more...

 
ę 2010 Michele Caroli Srl. Tutti i diritti riservati. Created by www.omnilink.it