Versione Italiana English Version Deutsch Espa˝ol Franšais
PRODUCTS AND SOLUTIONS


 
Home
 
 
INA TENSIONER BLADES AND CHAIN GUIDES
 
 
INA ROLLER CHAIN IDLER SPROCKET UNITS
 
INA roller chain idler sprocket units are guidance and return units for roller bush chains and roller chains. They can compensate for chain stretch resulting from operation and give smoother system running under high loads and speeds.

The ready-to-fit units comprise sprockets and deep groove ball bearings or radial insert ball bearings. The sprockets are made from high strength steel, sintered iron or plastic (polyamide). Sprockets made from plastic give particularly smooth running and generate very little noise. Since the inner ring of the deep groove ball bearing is extended on both sides, no additional spacer rings are required.

In series KSR..-B0, the inner ring is located on the shaft by means of a locking collar. The bearing bore of this series has a plus tolerance. As a result, unmachined shafts up to ISO tolerance h9 can be used under moderate loads and speeds.
 
INA IDLER PULLEY UNITS
 
Idler pulley units are tensioning systems for belt drives and idler units. They: 

- increase the wrap angle in belt drives and can therefore support higher power levels or allow smaller units to be used
- compensate for belt stretch resulting from operation
- allow shorter centre distances
- reduce the wear on the belt drive.

The ready-to-fit units comprise deep drawn, profiled sheet steel pulley halves riveted together and deep groove ball bearings. Pulleys of larger diameters are additionally welded together. A lead chamfer on the pulley profile prevents damage to the belt. Due to the sheet steel construction, the additional rotating masses and the out of balance masses generated are low. 

Type A is suitable for vee belts, type B for flat, vee and round belts, type D for round belts, steel cables and hemp ropes.
 
 
SKF SKF AUTOMOTIVE BOSCH REXROTH
REMSA MULLER FILTERS DAYCO
DONALDSON OPTIBELT PERKINS
VALEO DENSO AVA
MAGNETI MARELLI NRF AUTOGAMMA
CORTECO STC OPEN PARTS
RACOR OCAP EUROLITES
FILTRON AHE OSRAM
FAG STM MONROE
DEUTZ STABILUS BEHR
REPSOL LUK INA
  
 
  
 


Our brands, quality certified
Section continuously updated.
If you do not find what you need please contact us...
donaldson filters part number
filters oem part number
cooling fan oem part number
autogamma fan part number

Learn more...

 
Find Special Offers...
Section continuously updated.
oem part number steering and suspension parts
racor filters part number   racor filters codes
Bosch Rexroth linear motion
If you do not find what you need please contact us...

Learn more...

 
Contact us - Call us
Michele Caroli Srl
S.p. Bari-Modugno Km. 0,800 - 70026 Modugno (Ba)
Fax +39 080.5899263 e-mail:info@michelecaroli.com
P.Iva 02581050727

Learn more...

 
ę 2010 Michele Caroli Srl. Tutti i diritti riservati. Created by www.omnilink.it